HITACHI VLT4024E
Manual de Servicio

5.

How to Remove Cassette When Mechanism Malfunctions

If a cassette is caught in the mechanism because of some trouble in mechanism, use the following procedure to remove it:

Operational procedure
1) Remove the top cover and front panel. (Refer to "CHAPTER 2 DISASSEMBLY")

If tape winds around the cylinder in loading status:

If tape is not ejected in unloading status:

Remove the spring, lift the pressure roller and pull it out.
Lift the pressure roller to pull it out Remove the spring

Fig. 5-1

Slacken the tape and release it from the tension pole, guide rollers, slant poles and P. out arm.
Guide roller Guide roller P. out arm Tension pole Slant pole Slant pole

Fig. 5-2

1) Remove the two screws holding the UT-FL mechanism. 2) Hold the cassette lid with your fingers so that the tape is not damaged, and then remove the UT-FL mechanism. 3) Remove slack tape, and eject the cassette.

UT-FL mechanism

Remove 2 screws and lift the UT-FL mechanism in the direction of the arrow.

Fig. 5-3

1-9