SHARP VLMC500E
Manual de Servicio

VL-MC500S/H/E

3. DISASSEMBLY OF THE SET
Note: Before removing the cabinet, turn off the power supply, and ascertain that the battery have been removed. 1. 3.
LCD Panel
(d)

(c) Battery Unit (d)

FPC

(d)

1) 2) 3) 4)

Detach the battery unit. Remove the three screws ((d)XiPSN17P03000). Remove the one screw ((c)LX-HZ0050TAFN). Detach the LCD cabinet in the direction of the arrow.

1) Remove the FPC of the LCD panel, and detach the LCD panel in the direction of the arrow.

4.
(d) (d) (d)

2.
(d)

Tillt FPC

(d)

(d)

connector Main PWB

(d) Speaker Wire Connect (d)

Inverter PWB

1) Remove the two screws ((d)XiPSN17P03000). 2) Disconnect the speaker wire connector. 3) Detach the side cover in the direction of the arrow.

(d)

FPC

1) Remove the four screws ((d)XiPSN17P03000), the tilt FPC and the tilt wire connector to detach the lens section. 2) Remove the two screws ((d)XiPSN17P03000) to detach the main PWB. 3) Remove the one screw ((d)XiPSN17P03000) and the FPC to detach the inverter PWB.

4