SHARP VLH875T
Manual de Servicio

VL-H875T VL-H890T

VL-H875T VL-H890T

3-2. REMOVAL OF THE CAMERA PARTS
Note: Before removing the Cabinet, turn off the power supply,and ascertain that the battery has been removed.
(b) (d) (c) (c)

(a)

(c)

(b) Pull out (d) Pull out Camera front cabinet

1. Remove the screws (b)LX-HZ0018TAFF(1pc.),(a)LX-HZ 0018TAFN(1pc.),(c)LX-HZ0045TAFN(1pc.)and (d)XiPSF20P04000(1pc.), pull out the Front cabinet.

Speaker connector

(g) Camera rear grip cover

Remove

4. Remove the screws (b)LX-HZ0018TAFF(1pc.), (c)LXHZ0045TAFN(2pcs.) and (d)XiPSF20P04000(1pc.), pulling out the Camera rear Cabinet, and remove the Speaker connector.
(c)

(g)

2. Remove the screws (g)LX-HZ0045TAFF(2pcs.) and the Camera rear grip cover .

Battery catcher connector Pull out

Connector

Tilt Frame C

Claw

3. Remove the connector.

5. Remove the screw (c)LX-HZ0045TAFN(1pc.)and pull out the Tilt Frame C. Pull out the Tilt Frame C. at right angle, because of closing the claw. Then, pull out the battery catcher connector from the Tilt Frame C.

3-4