|
Usuarios conectados
Actualmente hay 5869 visitantes online.
|
Productos
|
Información
|
Destacado
|
|
|
|
|
No hay comentarios de productos.
VL-E630S/VL-E630H VL-E680S/VL-E97E VL-E99E
VL-E630S/VL-E630H VL-E680S/VL-E97E VL-E99E
1. SPECIFICATIONS
Signal System: Recording System: Cassette: Recording/Playback Time: Tape Speed: Pickup Device: Lens: Lens Filter Diameter: Monitor: Microphone: Color Temperature Compensation: Minimum Illumination: Video Output Level: Audio Output Level: Speaker Output: Power Requirement: Power Consumption: PAL standard 2 rotary heads, helical scanning system 8 mm video tape, MP type 120 minutes (P5-120) 20.051 mm/second 1/4" (6.4mm, effective size: 4.5 mm) CCD image sensor with approx. 320,000 pixels including optical black 16 � power zoom lens (F1.4, f=4.0-64.0 mm) and full-range auto focus 46 mm 3" (7.5 cm)�full-color LCD screen (TFT active matrix) Electret monaural microphone Auto white balance 0.8 lux (5 lux measured by EIA standard) (with gain-up, F1.4) 1.0 Vp-p 75-ohm unbalanced �8 dBs, impedance less than 2.2 kohms 200 mW DC 3.6V E630S/E630H/E97E:4.8W (during camera recording in full auto mode with zoom motor off, and backlight in normal mode) E680S/E99E:4.9W (during camera recording in full auto mode with zoom motor off, Extend Zoom, DIS and Snapshot functions off, and backlight in normal mode) 0°C to + 40°C (32°F to 104°F) 30% to 80% �20°C to +60°C (�4°F to 140°F) 182 mm (W) � 109 mm (H) � 99 mm (D) 690g (without battery pack, lithium battery, video cassette, and lens cap)
Operating Temperature: Operating Humidity: Storage Temperature: Dimensions (approx.): Weight (approx.):
AC Adapter/Battery Charger UADP-0280TAZZ UADP-0281TAZZ(VL-E630H)
Power Requirement: DC Output: Power Consumption: Dimensions (approx.): AC 110-240 V, 50/60 Hz 4.5 V 16 W 75 mm (W) � 51 mm (H) � 130 mm (D) Weight (approx.): 220 g
Battery Pack BT-H22
DC Output: 3.6V Dimensions (approx.): 54 mm (W) � 19 mm (H) � 56 mm (D)] Weight (approx.): 0.30 lbs (136 g)
Specifications are subject to change without notice.
3. DISASSEMBLY OF THE SET
3-4. INITIAL SETTING OF E2PROM IC
3-4-2. IC702 (E2PROM)
When the IC702 has been replaced, make the following settings and adjustments. 3. Setting up the V ADJ mode as follows. * After press the CONTINUE key, press the VCR ADJ key on service remote control (RRMCG0033TASA). E630S E630H E680S E97EX E99EX address data data data data data 02 0A 0A 0A 0B 0B 0A F5 F5 F5 F4 F4 03 80 88 B0 88 FA 0B 7F 77 4F 77 05 05 00 00 00 40 40 0D FF FF FF BF BF 01 00 00 00 00 00 04 00 00 00 00 00 2
|
|
|
> |
|