SHARP VL-AH30K
Manual de Servicio

VL-A10U/UC/UA/UW/T/K/A15U VL-AH30U/UC/T/K Supplement

2. SPECIFICATIONS
AC Adapter/Battery Charger UADP-0312TAZZ(VL-A15U) UADP-0316TAZZ(VL-A10K/AH30K)

Note: Change of the drum replacing method We have supplied upper and lower drums individually for replacement. However, we will supply the upper and lower drum ass'y only, since the manufacturing location is transferred to a foreign country. For the drum replacing method in the Service Manual of the base models (VL-A10U/UC/UA/UW/T/K/AH30U/UC/T), follow the following procedures. ("5-5-4 Drum and drum base" on pages 20-22).

5. MECHANISM ADJUSTMENT
5-5. MECHANISM ASSEMBLING AND PARTS REPLACEMENT (DISASSEMBLING AND ASSEMBLING)
5-5-4. Drum and Drum base
Drum base Earth spring Fixing screws

<Removing> (1) Drum base (Compatible with both types) Remove the 3 fixing screws to remove the drum base (See Fig. 1).

Upper and lower drum ass'y

Positioning holes

<Mounting> Perform it in reverse order of the drum removal. (1) Drum base Adjust the positioning pins to the positioning holes. Tighten the 3 screws. (2) Drum ass'y Fig. 1 Attach the drum ass'y to the main chassis and tighten the 3 screws. (3) Tape guide Adjust the positioning pins to the positioning holes. Tighten the one screw together with the ground lead wire.

6. ADJUSTMENT OF VCR AND CAMERA
6-1. INITIAL SETTING OF E2PROM IC
6-1-2. IC705 (E2PROM)
When the IC705 has been replaced, make the following settings and adjustments.
Data Address

A15U 00 FF 01 FE 60 9F 00 FF

AH30K 00 FF 06 F9 00 FF 40 BF

01 09 02 0A 03 0B 04 0C

2