E-MU VINTAGE_KEYS
Manual de Usuario

Preset Programming Editing Presets

To Change the Instrument for any Layer in the Preset:
6.

Use the Channel Select buttons to select another layer.

L2

INSTRUMENT

ROM:VROM

0101 wav: MiniTriangle
7. 8.

Find another instrument that sounds good when combined with the previous instrument selected. Repeat steps 6 and 7 if you want to add additional layers (although two layers will be enough for these experiments).

Now let�s play with the tuning.

Changing the Tuning of an Instrument

Tuning the selected layer of the preset changes the pitch of the key on the controller. If the numbers are �00,� it means that the instruments are tuned to concert pitch (A=440 Hz). The Coarse tuning value represents whole semitone intervals. The Fine tuning value shifts the pitch in 1/64 semitones (or 1.56 cents).

To Tune the Instrument of the Current Layer:
1.

Press the #3 Jump button twice to jump directly to Tuning page.

L1

TUNING Coarse: +36 Fine: +6

2. 3.

Move the cursor to the Coarse �eld (using the cursor button). Set the value to +12 to shift the pitch up a whole octave. To shift the pitch in smaller units than a semitone, use the Fine �eld.

Try tuning one of the instruments to a perfect �fth above the other by setting the Coarse value to +7. Tuning an instrument far out of its normal range completely changes the character of the sound. For example, if you tune a bass guitar up 2 octaves, it's going to sound rather petite. On the other hand, if you tune it down 2 octaves, you can probably rattle plaster off the walls! Experiment with radical pitch shifting. You'll be surprised at the results.

198 E-MU Systems