There are two ways for an extension to park a call. One way is to park the call at the receiving extension and to retrieve the parked call at another extension by dialing the park answer code plus the parking extension number. The other way is to park the call at another extension and dial the park transfer answer code at the other extension to retrieve the call. Beginning with Version 3.6, the user may park the call at another extension by pressing the BLF key. In addition, an Extension Group Pickup code allows the user to pick up a Transfer Recall (only on non-appearing calls), a Hold Recall, and a Station Park Recall. To park a call on this extension: Action
1. While on a call, press the HOLD key.
Result
� Current call on hold � CO HOLD #XX displays (where XX = trunk number)
2. Enter the Call Park Hold access code (default =771) or press the PARK HOLD key. 3. If necessary, page the party that needs to retrieve the call.
Accepted ST-Park displays
To retrieve a call parked at the originating extension from another extension: Action
1. Lift the handset or press the ON/OFF key. 2. Enter the Station Call Park Answer/Other Ext. access code (default 773). OR... Enter the Station Call Park/Floating Hold Answer feature access code (default = *9) (Version 2.0 or higher). 3. Dial the number of the extension that parked the call. � CO TALK TRK #XX displays (where XX = line number) � Connected to parked call
Result
Intercom dial tone Enter Park EXT # displays
To park a call at another extension: Action
1. Press the HOLD key.
Result
� Current call on hold � CO HOLD #XX displays (where XX = trunk number)
2. Enter the Call Park Transfer access code (default = 774). 3. Dial the extension number to receive the parked call, OR Press the BLF key 4. If necessary, page the party that needs to retrieve the call.
Enter TRNS EXT # displays Park (EXT#) displays on lower display
