VAA12001-R.3580.A 14. Setting for delivery For the repair parts of the main PCB, the default for setting destination is "Japanese speci�cation" (Japanese/NTSC). When this PCB is replaced, complete the assembly and then carry out setting for delivery according to each destination by pressing [MENU] and cursor button at the same time. [How to set] � Insert a CF card (which does not record any data). � Set the mode dial of camera to "A" and turn on the power. � For each destination, as pressing the following switches, turn off the power. E2000J: [MENU] + [�]: Japanese/NTSC E2000E: [MENU] + [�]: English/NTSC E2000EP: [MENU] + [�]: English/PAL E2000EN: [MENU] + [�]: English/NTSC � Turn on the power again. � Make sure that the remaining quantity is displayed at the lower right on LCD. � Make sure that "Card is not inserted" is displayed by removing the medium. � Turn off the power.
