TOSHIBA V611UK
Manual de Usuario

BASIC OPERATION

The Picture Alignment feature allows you to adjust the alignment manually to obtain the best possible picture.
DISPLAY

CURSOR

When noise bars or streaks appear during playback, adjust alignment manually by pressing the TRK (i or j) buttons until the picture is clear and stable. Result : The tracking bar appears. The image is adjusted. The tracking bar disappears when you release the button. As each VTR is different, slight adjustments need to be made in the way the tape is read. This is called �Tracking�. When playback starts the video recorder automatically adjusts the Tracking to obtain the best possible picture and sound; Digital Auto Tracking. The �AUTO� indicator will flash while this adjustment takes place and the playback picture and sound may be distorted. The VTR will automatically adjust the Tracking as bestother machines, you playback rented tapes or tapes recorded on it can. If you may occasionally find that the Digital Auto Tracking is not able to improve the picture sufficiently. In these instances you will need to adjust the Tracking manually. With a tape in and playing, hold down either the TRK (i or j) button on the remote control until the best possible picture and sound is obtained
R

��

�

END: MENU

OK
AUDIO

5

Press � button to select AUTO AUTO

0N

OFF.

Set when you used a wide TV. The VTR detects wide TV Programmes and normal TV programmes Automatically when playing back and recording.

ON

COUNT.RST

F.ADV

CLR/RST

The VTR always plays back and records in the mode compatible with 16:9 wide screen. Set if the VTR cannot detect wide TV programmes with �AUTO� set. Set if you do not use a wide TV.

OFF

I N N OVAT I V E

T ECHNOLOGY

6

On completion, press MENU twice to exit the menu.

CHANNEL

To resume Automatic Digital Tracking, press the two CHANNEL buttons on the front of the VTR at the same time until the AUTO light comes on. If the tape is old or worm, it may be impossible to improve the picture performance. if you press the PAUSE/STILL button the image may shimmer. This can also be reduced by adjusting the Tracking.

30

31

BASIC OPERATION

2-14 Toshiba
66

Reference Information

BASIC OPERATION

66

BASIC OPERATION

Playing back
This function allows you to play back any pre-recorded cassette.

Playing back continued
You VTR can automatically read a 16:9 signal from the AV2 input or a prerecorded 16:9 tape. It can broadcast a 16:9 signal through a 21 pin scart cable.

Playing a Cassette

Format 16:9 (Wide Screen)

1 2
CURSOR

Switch on both the television and your VTR.

1
Insert the video cassette to be played. If the safety tab on the cassette is intact, press PLAY (�). Otherwise, the cassette is played automatically. Note : When a cassette is loaded. the tape position is optimized automatically to reduce disturbance (Digital Auto Tracking). When playing a cassette, if the end of the tape is reached, the cassette is rewound automatically. NTSC tapes can be played back but cannot be recorded with this VTR. To.. Stop the playback Eject the cassette
REC REW PLAY FF STOP

Press MENU on the remote control. Result : The programming menu is displayed. Press the corresponding �, � or ¥, � buttons to select the USER SET option.

DISPLAY

2

PROG

OPTIONS

INSTALL

OK
AUDIO

CLOCK

BONUS

LANG

USER SET
�� ¥� OK

EJECT

3

T ECHNOLOGY

Then pres... s (STOP).

END: MENU

COUNT.RST F.ADV CLR/RST

w

(EJECT).

3 4

Press OK button to select this option. Result : The USER SET menu is displayed. Press the corresponding � or � buttons until the FORMAT 16:9 option is selected.
OSD TAPE SELECT COLOUR SYSTEM FORMAT 16:9 NICAM ECO.MODE
OPTIONS

Adjusting Picture Alignment Manually

:ON :E180 :AUTO :AUTO :ON :OFF