|
No hay comentarios de productos.
Level 1 and 2 Service Manual
Disassembly
7.
Lift the flip cover away from the flip assembly. Be careful not to damage the display flex cable (see Figure 12).
040723o
Figure 12. Removing the Flip Assembly Cover To replace, insert the smart buttons into the phone. Ensure the buttons contact their respective switches on the display assembly. 9. Align the flip cover to the flip assembly, gently press the flip cover onto the flip assembly until the flip cover latches engage. 10. Insert and tighten the 4 screws to secure the flip cover to the flip assembly. Avoid damage to the flex cable. 11. Insert the 4 rubber screw covers over the flip assembly screws. 12. Replace the transceiver board assembly, rear housing, antenna assembly, SIM, battery, and battery cover as described in the procedures. 8.
6809485A72-O
July 30, 2004
31
|
