SONY UYA-S90SF
Manual de Servicio

3. Top Cover/Under Cover (1) (2) (3) (4) Remove the side cover. (Refer to Section 2-1-2.2) Disconnect one harness from the MEC-13 board. Remove one screw, then remove the six hooks. Remove the top cover in the direction indicated by the arrow.

2-1-3. Replacement of Main Parts
1. Replacement of SE-611 Board (1) Remove the side cover. (Refer to Section 2-1-2.2) (2) Disconnect one harness from the SE-611 board. (3) Remove the two screws, then remove the SE-611 board.

Top cover

Top cover

Hooks Harness MEC-13 board

Hooks

Harness
BVTP 3x12

Roller shaft B Align the mating faces Hole Align the mating faces

BVTP 3x6

SE-611 board

(4) Attach a new SE-611 board in the reverse order of steps (1) to (3). 2. Replacement of MEC-13 Board
Roller shaft A Hole Under cover

(5) Attach the top cover in the reverse order of steps (1) to (4). n When attaching the top cover, make sure to align the mating faces before inserting the roller shafts A and B into each hole.

(1) Remove the side cover. (Refer to Section 2-1-2.2) (2) Remove the top cover and under cover. (Refer to Section 2-1-2.3) (3) Disconnect the five harnesses from the MEC-13 board. (4) Remove the three screws, then remove the MEC-13 board.
BVTP 3x8 Harness Harnesses

Harness

MEC-13 board

Under cover

(5) Attach a new MEC-13 board in the reverse order of steps (1) to (4). 2-2 (E)
UYA-S90SF