JVC UX-QD9SAU
Manual de Usuario

Introduction

(Continued) Using the Timers

For the locations of remote control buttons, refer to page 46.

8 9

Press

.

Press or to select the sound source you want to play back.

10 Press 11 Press 12 Press

.

or to adjust the playback volume. .
� The settings appear in the display window.

Example: When you want to listen to an AM broadcast

13 When the main unit is turned on,
� When you want to listen to sound from other equipment, you cannot use the playback timer function to start playback on any equipment other than this product. � You cannot use the playback timer function together with program playback, repeat playback or random playback of a disc.

press unit.

to turn off the main

� The playback timer is available only when the main unit is turned off.
NOTE

�When you want to listen to an FM/AM radio broadcast
� (With "FM" or "AM" selected) Press , and then press , or the number buttons to select the preset number of the radio station whose broadcast you want to listen to ( page 20). Refer to "Using the number buttons" ( page 16).

� During operation, you can return to the previous step by pressing . You can quit the playback timer settings by pressing . The settings are not stored. � When the playback timer starts, the volume gradually increases to the selected level.

�When you want to play back a DVD VIDEO or DVD AUDIO
� (With "DVD/CD" selected) Press twice. Regardless of the displayed numbers of group (G) and track (T), you can play back a DVD VIDEO or DVD AUDIO only from the beginning of the disc.

Canceling the playback timer function
In step 2 on page 48, select the timer number you want to cancel, and then press . Even when you cancel the playback timer, the setting remains stored.

�When you want to play back a CD, VCD or SVCD
� (With "DVD/CD" selected) Press twice, and then press , or the number buttons to select the number of a track (T) from which you want to start playback. Refer to "Using the number buttons" ( page 16). The group number (G) is ignored.

Activating the playback timer again
In step 2 on page 48, select the timer number you want to activate, and then press repeatedly until all of the setting procedure finishes. Then turn off the main unit.
NOTE

�When you want to specify a track from which you want to start playback on an MP3 or WMA
� (With "DVD/CD" selected) Press , press , or the number buttons to select the group number (G) to be played back, press , and then press

, or the number buttons to select the track number (T) to be played back. Refer to "Using the number buttons" ( page 16).

� When you want to activate two or three playback timers, leave a blank time of 2 or more minutes between the ending time of the first playback timer and the starting time of the second playback timer. If the blank time is less than 2 minutes, the second playback timer does not work. � When the power plug is disconnected or the power is cut, the playback timer settings may be lost. If the settings are lost, set the clock and playback timer again. � When you operate the playback timer with a DVD VIDEO, DVD AUDIO or VCD, sound and video may not be played back automatically. A DVD VIDEO, DVD AUDIO or VCD may contain a disc menu that appears first when played back. Sound or video will not come out before you select the desired item to be played back on the disc menu.

49