JVC UX-P3UP
Manual de Usuario

English
AM antenna

Connecting Speakers

]

]

1

2

3

ANTENNA

1
AM EXT AM LOOP

Vinyl-covered wire (not supplied)
RIGHT LEFT

Red Speaker cord
MAIN SPEAKERS

Speaker cord

FM 75 COAXIAL

SPEAKER IMPEDANCE MIN 4

Black

2
AM loop antenna (supplied) Right speaker Left speaker

1 Connect the AM loop antenna to the AM
LOOP terminals as illustrated.
� If the AM loop antenna wire is covered with vinyl, remove the vinyl by twisting it as shown in the diagram.

1 Press and hold the clamp of the speaker
terminal on the rear of the unit.

2 Turn the AM loop antenna until you have the
best reception.
To connect an outdoor AM antenna
When reception is poor, connect a single vinyl-covered wire to the AM EXT terminal and extend it horizontally. (The AM loop antenna must remain connected.)

2 Insert the end of the speaker cord into the
terminal.
Match the polarity of the speaker terminals: Red (+) to red (+) and black (�) to black (�).

3 Release the finger from the clamp.
IMPORTANT: Use only speakers with the same speaker impedance as indicated by the speaker terminals on the rear of the unit.

For better reception of both FM and AM � Make sure the antenna conductors do not touch any other terminals and connecting cords. � Keep the antennas away from metallic parts of the unit, connecting cords, and the AC power cord.

�7�