JVC UX-J50AU
Manual de Usuario

English

5

Press UP or DOWN to set the volume level, then press CLOCK/TIMER.
� You can select the volume level (�VOLUME � �� and �VOLUME 0� to �VOLUME 40�). If you select �VOLUME � �,� the volume is set to the previous level when the unit was turned off. � To turn off the volume while the Recording Timer (REC TUNER) is working, set the volume level �VOLUME 0.� The unit enters the clock setting mode.

Using Sleep Timer
With the Sleep Timer, you can fall asleep to music. You can set the Sleep Timer when the unit is turned on.

How the Sleep Timer actually works
The unit automatically turns off after the specified time length passes. On the remote control ONLY:

1

Press SLEEP.
The time length until the shut-off time appears and the SLEEP indicator lights up on the display. � Each time you press the button, the time length changes as follows:
SLEEP 10 SLEEP 20 SLEEP 30

SLEEP

6 7

Adjust the clock if you need.
� See �Setting the Clock� on page 9.

Press STANDBY/ON to turn off the unit (standby) if you have set the timer with the unit turned on.
start flashing.

STANDBY/ON

SLEEP 60 Canceled SLEEP120 SLEEP 90

� When the timer turns on the unit, the (timer) and the selected timer mode indicators (DAILY or REC)

2
CLOCK /TIMER

To deactivate the timer temporarily, press and hold CLOCK/TIMER until the (timer) indicator on the display goes off.

Wait for about 5 seconds after specifying the time length.
The illumination and display dim.

To activate or change the timer (with the previous setting), follow steps 1 to 7 on pages 20 and 21. � If you want to change the timer setting after the Daily Timer be used, first deactivate the timer.

To check the remaining time until the shut-off time, press SLEEP once so that the remaining time until the shut-off time appears for about 5 seconds. � The illumination and display brighten during this period. To change the shut-off time, press SLEEP repeatedly until the desired time length appears on the display. To cancel the setting, press SLEEP repeatedly until the SLEEP indicator goes off. � The Sleep Timer is also canceled when you turn off the unit.

� If the unit is turned on when the timer on-time comes Timer does not work. � When you unplug the AC power cord or if a power failure occurs The timer will be canceled. You need to set the clock first, then the timer again.

� If you set the Sleep Timer after the Daily Timer starts playing the selected source The Daily Timer is canceled. When the Sleep Timer shut-off time comes, the unit will be turned off. � If you set the Sleep Timer after the Recording Timer starts recording The Recording Timer is canceled, but recording continues until the Sleep Timer shuts off the power.

21