JVC UXJ50
Manual de Servicio

UX-J50

2.1.4 Removing the tuner board (See Fig.7) � Prior to performing the following procedure, remove the metal cover. (1) Disconnect the card wire from the connector CN1 on the tuner board. (2) Remove the two screws F on the rear side and the screw G in the side.

G

F

Tuner board CN1 Fig.7

2.1.5 Removing the CD-R/RW mechanism assembly (See Fig.8) � Prior to performing the following procedure, remove the metal cover, the rear cover, the rear panel and the tuner board. (1) Disconnect the card wire from the connector CN903, CN902 and CN904 on the main board. (2) Pull the joint d in the direction of the arrow and remove the CD-R/RW mechanism assembly backward while releasing the joint e .

CD-R/RW mechanism assembly

d d

e CN903 CN904 Main board CN902
Fig.8

1-8 (No.22032)