UWL-1 SERVICE PROCEDURES - 2
2. Inspection routine
1. Connecting the Transmitter (UTX-1)
1 Start up your PC. Wait until the startup process is complete and Windows(R) is ready to use. Note: Before you plug or unplug the Transmitter, turn down the volume on your audio system or powered speakers, or unplug the Receiver s AC adapter from the wall outlet. 2. Remove the Transmitter s cap, and then plug the Transmitter into a USB port on your PC. The Transmitter s Transmit indicator lights up. Be careful to insert the Transmitter the right way. When you plug the Transmitter into your PC for the very first time, Windows(R) will automatically detect it as new hardware and install the necessary drivers. Please wait until this process is complete. If Windows(R) does not detect it automatically, see below.
Transmit indicator
(The position and number of USB ports depends on your PC. Check your PC fs manual for details.)
2. Connecting the Receiver (RX-1) Typical Hookup Example
Receiver (RX-1)
AC adapter Plug into AC outlet
Supplied miniplugtoRCA audio cable
Optical digital cable
Optical input Powered speakers Audio component with optical digital input
