ONKYO TXSR603E
Manual de Usuario

Zone 2�Continued
Setting the Powered Zone 2
To use Zone 2, you must make this setting. It enables the speakers connected to the ZONE 2 SPEAKERS terminals so that they produce sound when Zone 2 is used.
ENTER

3

Use the Up and Down [ ]/[ ] buttons to select �g. Powered Zone 2,� and use the Left and Right [ ]/[ ] buttons to select:

1 2 2, 3 1, 4
Not Activated: Zone 2 SPEAKERS terminals deactivated. Activated: Zone 2 SPEAKERS terminals activated. When Zone 2 is activated and turned on (see page 76), the speakers connected to the ZONE 2 SPEAKERS terminals output sound, but the speakers connected to the SURROUND BACK SPEAKERS terminals do not (when Zone 2 is activated but not used, the surround back speakers work as normal).

1
RECEIVER

Press the [RECEIVER] button followed by the [SETUP] button. The main menu appears onscreen.

4

Press the [SETUP] button. The setup menu closes.

2
ENTER

Use the Up and Down [ ]/[ ] buttons to select �0. Initial Setup,� and then press [ENTER]. The Initial Setup menu appears.

Note: This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.

ENTER

75