cover
Pull out to the stop, lift the front and pull again.
the crispers:
Slide crisper straight out to the stop.
2. Lift the front and slide out the rest of the way. 3. Replace in reverse order.
To remove 1.
the cover:
Push up the glass insert from the bottom, then slide out with both hands.
2. Lift front of cover frame. 3. Lift cover frame up and out.
To replace 1. the cover:
Remove the cover insert. Lift the cover front, then the back. NOTE: Handle glass Insert with care. It could be heavy.
Fit back of cover frame into notch supports on back wall of refrigerator, then lower the front into place. 2. Make sure the front cover metal support is in the notches in the sides of the liner. NOTE: If the support is not positioned properly, the doors may not close all the way. 3. Slide back of glass insert into place, then lower front.
Removing
To remove 1. the shelf:
the freezer
shelf
Remove the freezer shelf for easier cleaning. Lift front of shelf slightly. 2. Lift back of shelf off supports. 3. Replace in reverse order.
