WHIRLPOOL TT18HKXAN00
Manual de Usuario

Removing
To remove 1. Lii front 2. Lii back 3. Replace

the freezer

shelf

the shelf: of sheff slightly. of shelf off supports. in reverse order.

Using

the ice cube trays

If cubes are not used, they may shrink. The moving cold air starts a slow evaporation. The longer cubes are stored, the smaller they get. To remove ice: 1. Hold tray at both ends. 2. Twist slightly.

Using

the optional

automatic

ice maker

If you have an automatic ice maker, or if you plan to add one later (Part No. IMKIT), there are a few things you will want to know: l The ON/OFF lever is a wire signal arm. Down . . . to make ice automatically. up . . . to shut off the ice maker. .. NOTE: Do not turn ice maker on untLr& . wnnectd to the water suppk. Instruc-

Raise signal arm to stop ice.

Lower
l

l

The dial or lever on the side of the ice maker changes the size of the cubes. Shake the bin occasionally to keep cubes separated and to obtain increased storage capacity. It is normal for ice crescents to be attached by a corner. They will break apart easily. You will hear water running when ice maker is working. You�ll hear ice fall into the bin. Don�t let these sounds bother you.

signal
arm to start it.

l

l

10