JVC TM-A170G/E
Manual de Usuario

4. Press VOLUME/SELECT buttons to adjust the 00 ~ 50 16 Main power switch 18 Power cord
Caution:
In North America (USA and Canada), this monitor comes
VOLUME : 20

Press switch to turn main ON OFF. Connects the provided power cord (120 V AC or speaker volume. When main is ON, power indicator on 230 V AC, 50 Hz/60 Hz) to the AC IN connector Press this button to display speaker volume level on the &. front panel lights in orange and monitor enters the screen. VOLUME/SELECT stand-by mode. + : The Built-in speaker volume is increased. (00 = 50) dom, two power cables are provided (one for use in * The on-screen display goes off when you press MENU button.

I ON OFF � : The Built-in speaker volume is decreased. (50 = 00) with one power cable. In Europe and the United King-

* Screen indication will disappear about 10 seconds after operating.

continental European countries and other for the UK). � +

17 AC inlet [AC IN]

PICTURE ADJUSTMENT
qualified service personnel to obtain the correct type of 1. Press select buttons corresponding to the item power cable. you want to adjust.
CHROMA CONTRAST The item you select is displayed on the screen. PHASE BRIGHT 3 Contrast control : Press the CONTRAST/BRIGHT button once.

Power input connector. Connect the provided AC power Be sure to use power cable that is appropriate for the cord to an outlet (120 AC or 230 V AC, AC outlets used in your region. If none of the power * 50 Hz/60 Hz). cables provided is suitable, please contact your dealer or

1 Chroma control : Press the CHROMA/PHASE button once. 2 Phase control : Press the CHROMA/PHASE button twice. 4 Brightness control : Press the CONTRAST/BRIGHT button twice.
* Pressing the CHROMA/PHASE and CONTRAST/BRIGHT button alternately while item is shown on screen restores the previous status. When no item is shown on screen, CHROMA and CONTRAST have priority. PHASE : 00

2. Adjust with the VOLUME/SELECT buttons. Notes:
VOLUME/SELECT � +

� +
Items NTSC color system mode. CHROMA receiving B/W or when no signal is
input. � Phase control is effective only in the VOLUME/SELECT button � Chroma control is not effective when

lighter deeper (Chroma) PHASE � When CHROMA is adjusted to ��40,� CONTRAST BRIGHT
* Screen indication will disappear about 10 seconds after operating. * The on-screen display goes off when you press MENU button.

reddish greenish (Phase) the picture becomes less colorful. lower higher 3 seconds) when your selected (Contrast) darker brighter (Brightness)

� �NO EFFECT� is displayed (for about function has no effect.

6 7

ENGLISH

1-4

TM-A170G

CONTROLS AND FEATURES (cont�d) HOW TO HANDLE BASIC OPERATIONS REAR VIEW
STATUS indication (PAL or NTSC)

<Rear Panel> BASIC OPERATION

1. Press main power switch to turn on the power. 2. Press POWER switch to turn on the power. PAL
ON : Power turns ON. (Power indicator: lit)
REMOTE

18 Green: The main power is ON, and the monitor�s
POWER To AC outlet

power is ON (in the normal operation mode).

(120 V AC, For U.S.A. and Canada 50 Hz/60 Hz) Orange : The main power is ON, but the monitor�s
VIDEO A

OFF : Power turns OFF. (Power indicator: unlit) power is OFF (in the standby mode)
IN OUT

To AC outlet Unlit : The main power is OFF.
VIDEO B
IN OUT

AC,V(230
IN Y/C OUT

50 Hz/60 Hz)
AUDIO A
IN OUT

indicationSTATUStheAboutinput.choosetobuttonsSELECTINPUTthePress3.18

reartheonterminalstoinputsignalsvideo/audioSelectEuropeForsetsettingSYSTEMCOLORWith�
IN OUT

AUDIO B

A B

power or select inputs, the color INPUT Terminals on the rear panel system indication appears for about
INPUT SELECT

to AUTO mode, when you turn on the panel. The selected button lights in green.

SELECT 3 seconds on the screen while PAL or

1 Input A It does not appear when receiving a 2 Input VIDEO B terminal Refer to page 8 for more information
(VIDEO Y/C) AUDIO B terminal about COLOR SYSTEM setting and VIDEO B (Y/C) terminal page 9 for more information about
Note:The Y/C (S-video) terminal has priority.

buttons Video Audio signal input 18 NTSC signals are being detected. (VIDEO) For the United Kingdom B/W or when no signal is input. VIDEO AUDIO A terminal

17 16

STATUS indication setting.