AEG TM220W
Manual de Usuario

The tumble dryer must be installed in a clean place, where dirt does not build up. Make sure there are no obstructing items or material near the air-intake louvres provided at the back (e.g. paper, rags etc.).

Door reversal
To make it easier to load or unload the laundry the door can be reversed. This operation must be carried out by qualified personnel. Operate as follows: - Remove the door by unscrewing the two screws (1) fastening the hinge to the cabinet (Fig. A). - Remove the safety catch (2) and the plug (3) by bending the two fastening tags (Fig. A). - Refit the safety catch (2) and plug (3) on the door by reversing their positions (Fig. B). - Remove the plastic plate (4) by unscrewing the two fastening screws (Fig. A). - Refit the the plastic plate (4) on the opposite side (Fig. B). - Refit the door by screwing in the two screws (1) which fasten the door to the cabinet (Fig. B).

P0281

Important When operating the tumble dryer, the room temperature must not exceed 35°C, as it may affect the performance of the appliance. To save energy, the room temperature should not be lower than +15°C.

Levelling
Level the tumble dryer into place by screwing or unscrewing the front feet as required. Accurate levelling will keep vibration and noise to a minimum when the dryer is in use.
3 P0283 1 4 2

A

P0046

4
P0748

1

2 3

B

10