If you adjust other setting item, return to step 3. �: +: Keystone: (�) To reduce the lower width. (+) To reduce the upper width. Phase: To reduce flickers. H-position: To shift the image to the left (�), to the right (+). V-position: To shift the image down (�), to up (+). Clock: To remove vertical stripes.
ENTER
ENTER
At this time, if you press the ENTER button, the screen changes to display the item selected only. Pressing the MENU button will return to the previous setting screen.
ENTER
Keystone
Adjustments
5
Notes
MENU
Press MENU several times until the full menu screen disappears.
MENU
� During adjustments of �H-position� or �V-position�, the image may not be projected properly. � While using, an aberration of the phase may occur. In that case, adjust �Phase� again. � Depending on the input signal, the adjustment bar when adjusting the clock may not move in full scale. � Pressing the MENU button will return to the previous setting screen. � You can adjust the �H-position� and �V-position� for every input sources (RGB, Video). � You can not adjust �Phase� and �Clock� at Video input. � The value(s) adjusted and/or setting(s) is memorized. � Press the RESET button, the menu screen disappears.
