TK-3160
DISASSEMBLY FOR REPAIR
1. Separating the case assembly from the chassis.
1. Remove the volume knob z. 2. Remove the two screws x. 3. Lift the chassis c, and remove it from the case assembly. Note: After separating the case assembly from the chassis, remove the channel knob.
3. How to remove the battery terminal block.
1. Remove the two screws /, then pull out the back cover �. 2. Remove the screw �.
2. Separating the chassis from the TX/RX unit.
1. Remove the two screws v fixing the TX/RX unit B/2. 2. Remove the twelve screws b and two screws n fixing the TX/RX unit A/2. 3. Remove the solder from the antenna terminal using a soldering iron m, then lift the unit off.
Note: The two screws n of TX/RX unit A/2 are fixing the battery terminal block ,.
