|
Usuarios conectados
Actualmente hay 5847 visitantes y 21 usuarios online.
|
Productos
|
Información
|
Destacado
|
|
|
|
|
No hay comentarios de productos.
Using the DVD player
and represent disc types.
To play a disc
On the front panel
3 2
Notes: � The unit can playback DVD VIDEO, Audio CD, Video CD, and SVCD discs only. Do not load other disc types. For details about playable disc types, see page 5. � When loading a disc in the tray, be sure to position the disc inside the recess. Otherwise, the disc may be damaged when the tray is closed, and the disc may not be removed form the unit.
� Playback begins automatically with some discs. � DVD or Video CDs/SVCDs recorded with PBC (playback control), pressing PLAY may display the menu on the TV screen. You may select items from the menu screen thus displayed and call up the locations to be viewed (see pages 24 and 25 for details). � You can also open and close the disc tray from the opening onscreen display. Use the 5/� cursors to move pointer to ), then press ENTER to open or close the disc tray. � Discs may be played back from the on-screen menu. Use the 5/� cursors, move the pointer to #, and press ENTER to begin playback. To stop playback competely From the remote controls: Press STOP. On the front panel: Press 7.
1. 2.
Switch the TV and display video on from this system.
Set the TV input to video 1 (or video 2 or video 3).
Insert the disc.
1 Press 0 *on the center unit to open the disc tray. Change the playback source to DVD. 2 Place the disc in the tray. With the playback side (non-label side) down. To insert an 8 cm disc, place it in the inner recess.
Display when a disc is inserted ���������
When a DVD is inserted Display window:
�READING�=�DVD� Opening on-screen:
3 Press 0 to close the disc tray. Playback begins immediately a DVD auto-playback disc is inserted.
When a Video CD or SVCD has been inserted Display window:
�READING�=�VCD 12 48:12� (total number of tracks and total time display) « +After 4 seconds �VCD 1 4:12� (first track time)
Opening on-screen:
3.
Play the disc.
From the remote controls:
Press DVD.
Change the playback source to DVD. The remote control enters the DVD mode and playback begins. Primary remote control Secondary remote control
When an Audio CD has been inserted Display window:
�READING�=�CD 12 48:12�
Opening on-screen:
(total number of tracks and total time display) « DVD DVD +After 4 seconds
�CD 1 4:12� (first track time)
On the front panel:
Press 3**.
Change the playback source to DVD. Playback begins.
When 0 on the center unit is pressed while on standby, power is automatically turned on and the disc tray ejected. ** When 3 on the center unit is pressed while on standby, power is automatically turned on, and playback begins, if a disc is in the tray. DVD is selected as the playback source if there is no disc in the tray. *
22
|
|
|
> |
|