PANASONIC TH65PX600U
Manual de Usuario

Watching Videos and DVDs
Some Panasonic equipment connected to the TV unit can be operated with the remote control. Programming the remote control is necessary to operate other manufacturers� products. (p. 43)

Displaying PC Screen on TV
The screen of the PC connected to the unit can be displayed on the TV. You can also listen to PC sound with the audio cable connected. To connect PC (p. 44)

1

1
With VCR or DVD turned On

Select the external input

Switch to external input

Press to display the Input select menu.

2 2
Select the input mode
Input select [1] TV [2] Component 1 [3] Component 2 [4] HDMI 1 [5] HDMI 2
-

Select �PC�
PC

�

Corresponding signals (p. 26)

Press corresponding NUMBER key on the remote control to select the input of your choice.

Displays PC screen

or select enter

To return to TV
Press arrow up/down to select the input of your choice, then press OK. If during selection, no action is taken for several seconds,

Viewing Displaying PC Screen on TV

[6] HDMI 3 [7] Video 1 [8] Video 2 [9] Video 3 [0] PC
(Initial screen)

�

the �Input select� menu is exited.
Label
Video 1 VCR

�

PC menu setting (changed as desired)
Making settings �How to Use Menu Functions� Item
Normal Sync Resets PC adjust

to

(p. 28)

Terminal

Menu

Adjustments/Configurations(options)

�

The terminal and label of the connected device is indicated. To change the input label (p. 40)

� �

Watching Videos and DVDs

H&V : The H and V sync signals are input from the HD/VD connector. On G : Uses a synchronized signal on the Video G signal, which is input from the G connector.

3
Press to return to TV

Operate
the VCR or DVD with the remote control

[example]

Dot clock

Alleviates the problem if a picture appears to be vertically-striped, flickers partially or is blurred. Adjust the horizontal position.

(example)

VCR MODE

DVD MODE

H-position Adjust the vertical position.

VCR Record -

Record Open/Close Skip Reverse/Forward Reverse/Forward Stop Pause Play
H-frequency V-frequency Clock phase

PC adjust

Picture

V-position

�

manual of the equipment

Note

Rewind/Fast Forward Stop Pause Play
(For other operations, see p. 46.)

Alleviates the problem if the whole picture appears to flicker or is blurred. First adjust the Dot Clock to get the best possible picture, then adjust the Clock Phase so that a clear picture appears. Switches to wide display. Input signal switched from VGA to WVGA Note It may not be possible to display a clear picture due to poor input signals.

For details, see the

Input resolution

or ask your local dealer.

Input signal switched from XGA to WXGA Displays the H (Horizontal)/V (Vertical) frequencies. Display range Horizontal: 15 - 110kHz Vertical: 48 - 120Hz

� � �

26

� �

Audio menu (p. 28) For PC input, only audio signals can be output from PROG. OUT terminals.

27