PANASONIC TH58PX60U
Manual de Usuario

Accessories/Options
2
Setting-up
Television unit Lift the television unit above the pedestal base, with the back of the display unit on the same side as the Label. Then align the holes in the television unit with the poles of the pedestal and lower the television unit into place. Use the assembly screws B (M5 x 30) to fasten securely.
* Carry out work on a horizontal and level surface.

B B
Rear Label

Pedestal

3

Stopping the plasma television from falling over
* The plasma TV must be fastened to both the base and the wall.

For 37'', 42'', 50'' Plasma television

Accessories for pedestal security
1 Band (2) 2 Screw (2) 3 Wood screw (2) 4 Clamp (2)

Nominal diameter 4 mm x 12

�Securing to a base

�Securing to a wall
* Remove the screws at both top corners on the rear side of the plasma TV, and attach the clamps 4 to the plasma TV using the removed screws.

Front

Screws on main body

Front

Securing method D * Use strong wire or chain which is commercially available to secure the plasma television to a solid area of the wall or a pillar.

Wood Worktop

Fasten with wood screws in the holes in the back edge of the wood worktop. If there are no holes, first drill them in the middle of the thickness of the wood worktop, and then fasten the strap with wood screws.

8