6.29. Remove the S-Board
1. Disconnect the coupler (S1). 2. Remove the screws (�2 frame. 3. Remove the screws (�2 ) and remove the S-Board metal ) and remove the S-Board.
6.31. Remove the Plasma panel section from the Front frame (glass)
1. Remove the front frame and the plasma panel fastening screws (�12 ). 2. Remove the front frame and the stand brackets fastening screws (�2 ).
6.30. Remove the GS-Board
1. Remove the stand bracket R. (See section 6.23.) 2. Unlock the cable clampers to free the cable. 3. Disconnect the coupler (G52). 4. Remove the screws (�3 5. Remove the SD card unit. ). 3. For leaving the plasma panel from the front frame, pull the bottom of the front frame forward, lift, and remove.
6. Remove the screws (�2 cover. 7. Remove the GS-Board.
