WHIRLPOOL TCF0710AW00
Manual de Usuario

I I

Using Your Freezer

Setting control

the temperature

The outside of your freezer may feel warm. This is normal. The freezer�s design and main function is to remove heat from packages and air space inside the freezer. This heat is transferred to the room air, SO the outside walls of the freezer may be warm.

The basket
Store small packages in the basket to avoid losing them in the bottom of the freezer. The basket can be moved from side to side or removed when loading or unloading food below it. To remove basket:
l

Turn control to �4�. This setting is designed to maintain the temperature at or near 0°F (-17.8%) under normal operating conditions. B

8

Adjusting the temperature control . Turn control to higher number for

colder

Lift basket up and out. To replace basket: Lower basket into place.
l

temperatures. . Turn to lower number for less cold temperatures.

The key eject lock
Allow the freezer to cool 6 to 8 hours before filling with frozen food. Let the freezer cool overnight before adding large amounts of unfrozen food. Never add more than 2-3 pounds of unfrozen food per cubic foot of freezer size. NOTE: When freezer is first started, the compressor will run constantly until the cabinet is cooled. It may take up to 6 to 8 hours or longer, depending on room temperature and the number of times the freezer lid is opened. After the cabinet is cooled, the compressor will turn on and off as needed to keep freezer at the proper temperature. The lock on your freezer can help reduce the hazard of child entrapment. To lock or unlock the freezer, you must hold the key in the lock while turning. The lock is spring loaded, so the key cannot be left in the lock. If the key is lost, contact your Estate dealer for a replacement. Always give the complete model and serial number of your freezer when requesting a replacement key.

Page 3