Frequently asked questions
What if the dryer will not run?
Possible fault Fix
The "Start/Stop T" button was not pressed. The circuit breaker tripped or the dryer is unplugged. The door is not closed. How do I prevent static cling?
Make sure the dryer is on. Press the "Start/ Stop T" button to begin the drying program. Make sure the dryer is plugged in or reset the circuit breaker. Close the door properly.
Add fabric softener to laundry when washing or select the "Less Dry" setting on the dryer. What if the drum light does not come on?
Possible fault Fix
The bulb may be bad or burned out.
See "Changing the light bulb."
What if the "Child Lock" indicator flashes after turning the dryer on and a program cannot be started?
Possible fault Fix
The child lock is activated.
Deactivate the child lock. See "Child Lock."
What if the program stops, the "Anti-crease / End" indicator lights and the buzzer sounds?
Possible fault Fix
The drum is empty.
Load laundry into the dryer. The dryer will not operate when the drum is empty. Single items should be dried with "Sturdy" or a timed program and dry items in the "Fluff" program.
What if the "Filter/Vent" fault indicator is lit?
Possible fault Fix
The lint filter is clogged. The exhaust hose or the connection is clogged with lint. The air supply in the room is insufficient.
Clean the lint filters. See "Dryer care". Remove lint and check the exhaust system for blockages. Open a window or door to increase airflow.
