AIWA SXNV20
Manual de Usuario

BASIC OPERATION
1 Press the TUNEIWBAND button to set one of the bands. + See illustration u -l. m 2 Check whether the manual tuning mode is selected. + See illustration u -2.
In the manual tuning mode, the preset number is not displayed. (@in the display shows the position of the preset number.) If the preset number is displayed, press the D PRESET/ TUNING button so that the preset number goes out.

3 Press the + DOWN or * station. + See illustration

UP button to select a

u-3.

Each time it is pressed, the frequency is changed. To search for a station quickly (Auto search) Press the + DOWN or M UP button for 1 to 2 seconds, and a station is searched for automatically. After tuning in to a station, the search stops. The search may not stop at a station with a very weak signal. When an FM stereo broadcast is difficult to listen to Press the FM MODE button on the remote control while pressing the SHIFT button to extinguish �AUTO in the display. + See illustration u Background noise is reduced though the sound is monaural. To restore stereo reception, press it again.

(*
M DOWN

)
uPm

b

w
q

AUTO SHIFT FMMODE BAND i!l

PRESElllNG

STATIONS

�T*T

The unit can store a total of 32 stations. They can be tuned in to by selecting their preset numbers. It is possible to store stations of any band in the order of your choice.

E-2 a,,
SET b

1 Select a band and station. 2 Press the II SET button to displaya preset number. + See illustration u -2.
The preset tuning mode is selected. In the preset tuning mode, the preset number flashes. (@ in the display shows the preset number).

R-3

3 Press the + DOWN or UP button to select a preset number. + See illustration H-3. 4 Press the II SET button to store the station. + See illustration E-4.

E-4 a

1,
SET

The frequency flashes twice and the preset number @) in the display flashes once and goes out.

n

5 Repeat steps 1 to 4 for the next preset.

30