PHILIPS SW8000SA/17S
Manual de Servicio

2-1

DISASSEMBLY INSTRUCTIONS
Dismantling the Grille Frame Assembly
1. Place the Subwoofer Box as shown in the Picture 1 and pull to force open the Grille Frame Assembly. Caution: Take care the surface when take out the Grille Frame Assembly of Subwoofer.

Dismantling the Rear assembly
1. Loosen 8 screws A as shown in the Picture 2 (Rear View) to pull out the Printed Circuit Board assembly. Caution: Do not break the bundle of wires to the front.

A

Picture 1

Picture 2

Dismantling the Front Assembly
1. Place the Subwoofer Box as shown in the Picture 3 and use a screw driver to force open the front assembly. Caution: Do not break the bundle of wires to the front. Take care the surface when take out the front panel of subwoofer

WARNING: THERE IS ONLY A LED BETWEEN THE FRONT PANEL AND WOOD BOX. IF NOT NECCESSARY, PLEASE DO NOT TRY TO OPEN THE FRONT PANEL!!!

Picture 3