PIONEER SW100S
Manual de Servicio

S-W100S

6. ADJUSTMENT
There is no information to be shown in this chapter.

7. GENERAL INFORMATION
7.1 DISASSEMBLY
Grill ASSY

Slit

¶ GRILL ASSY SECTION
Remove the Grill Assy. Insert a screwdriver into the slit under the Grill Assy to pry open the front grill gradually and uniformly. Remove 3 (AC and Signal) connectors from the CONT ASSY .

2

JACK Assy
3 3 A 4 5

1

Speaker

2
¶ REAR COVER SECTION
Remove 6 screws (1) from the Rear Cover.

¶ JACK ASSY SECTION

1

Remove 6 screws (2) from the JACK Assy. Remove the A connector from the CONT Assy .

¶ SPEAKER SECTION

5

Remove the Rear Cover. Each speaker is attached to the Back board by 4 external screws (3). detach it, unfasten those screws. When attaching it, face its terminal upward.

Rear Cover
6
¶ POWER ASSY SECTION
Remove the Rear Cover. Remove 6 screws (5) from the Back board. Remove the 6 connector from the POWER Assy .

POWER Assy
Back board

11