PIONEER S-VSL3/XTW/E
Manual de Servicio

ORDER NO.

RRV2933

SPEAKER SYSTEM

S-VSL3

S-VSL3
FOR PRECAUTION OF REASSEMBLY AND DISASSEMBLY
The grille is attached to the cabinet by its bosses applied with adhesive. To detach it, first unfasten 4 screws of the top plate. Next detach the top plate with the packing. Then pry it open by inserting a flat blade screwdriver into the grille upper side. To attach it, first attach the top plate and packing by 4 screws. Next apply adhesive to the holes on the baffle. Then press it to the baffle. The woofer is attached to the baffle by 4 external screws. To detach it, unfasten those screws and turn it 45 degrees counterclockwise. When attaching it, face its terminal upward. The tweeter is attached to the baffle by 3 external screws. To detach it, unfasten those screws. When attaching it, face its terminal downward. The network assy is attached to the baffle by 4 internal screws. To detach it, unfasten those screws. To detach it, remove the grille. Then detach the baffle board (16 screws). To attaching it, fit its hole into the hollow on the baffle.

XTW/E

Network Assy

Choke coil face downward

Port tube

PIONEER CORPORATION

4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A. PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936

PIONEER CORPORATION 2004
T � ZZP APR. 2004 Printed in Japan