PIONEER S-VS99V/XJI/E
Manual de Servicio

ORDER NO.

RRV2025

SPEAKER SYSTEM

S-VS99V
S-VS99V S-VS99V
FOR PRECAUTION OF REASSEMBLY AND DISASSEMBLY
The woofer is attached to the cosmetic baffle assy together with the woofer ring assy by 4 internal screws. To detach the woofer (woofer ring assy), loosen these screws. To attach the woofer ring assy, fit the boss of the woofer ring to the hollow of the cosmetic baffle assy. To attach the woofer, face its terminal upward, and fit the boss of the cosmetic baffle to the hollow of the flame. To attach the woofer ring assy and the woofer, replace it on the cosmetic baffle assy correctly and secure with 4 screws. The mid-range is attached to the cosmetic baffle by 3 internal screws. To detach it, unfasten those screws. When attaching it, face its terminal downward. The tweeter is attached to the cosmetic baffle by 2 internal screws. To detach it, unfasten those screws. When attaching it, face its terminal downward.

XJI/E

XJI/NC XJI/CN

This product is component of system. For the operating instructions, refer to the service manual RRV2036 for XR-VS99.

The cosmetic baffle assy is attached to the cabinet by 4 external screws. To detach it, loosen these screws. Then carefully disconnect the wires of the woofer, mid-range, and tweeter mounted on the cosmetic baffle assy. To attach it, replace it on the cabinet correctly and secure with 4 screws. The network assy is connected to the input terminal. To detach it, disconnect the wire from the input terminal. To attach it connect the wire of the network assy to the input terminal correctly.

PIONEER ELECTRONIC CORPORATION

4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS SERVICE, INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A. PIONEER ELECTRONIC (EUROPE) N.V. Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 501 Orchard Road, #10-00 Wheelock Place, Singapore 238880

PIONEER ELECTRONIC CORPORATION 1998

T-ZZW SEPT. 1998 Printed in Japan