Notes on chip component replacement � Never reuse a disconnected chip component. � Notice that the minus side of a tantalum capacitor may be damaged by heat. Flexible Circuit Board Repairing � Keep the temperature of soldering iron around 270�C during repairing. � Do not touch the soldering iron on the same conductor of the circuit board (within 3 times). � Be careful not to apply force on the conductor when soldering or unsoldering.
MODEL PRODUCT COUNTRY MALAYSIA POWER CORD
SAFETY-RELATED COMPONENT WARNING !! COMPONENTS IDENTIFIED BY MARK ! OR DOTTED LINE WITH MARK ! ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
JACK (MIC2) (Refer to Fig 3) NOT USED
LABEL MODEL NUMBER (Refer to Fig 1) 4-210-483-0�
PTY button (Refer to Fig 2) USED
AEP
East European ,CIS Saudi Arabia ,Taiwan Singapore ,Malaysia
MALAYSIA
NOT USED
4-210-483-0�
NOT USED
MALAYSIA
NOT USED
4-210-481-0�
NOT USED
MALAYSIA
NOT USED
4-210-479-0�
NOT USED
Saudi Arabia
JAPAN
USED
4-210-481-0�
NOT USED
Thai
THAI
NOT USED
4-210-482-0�
NOT USED
Israel
MALAYSIA
NOT USED
4-210-482-1�
NOT USED
Argentine
MALAYSIA
NOT USED
4-210-479-0�
NOT USED
Australian
MALAYSIA
NOT USED
4-210-480-0�
NOT USED
UK
MALAYSIA
NOT USED
4-210-483-1�
NOT USED
E
MALAYSIA
NOT USED
4-210-479-0�
NOT USED
Chinese
MALAYSIA
NOT USED
4-210-492-1�
NOT USED
Tourist
JAPAN
USED
4-210-481-0�
NOT USED
LABEL MODEL NUMBER
MIN MAX MIX MIC 2
Jack (MIC 2) PTY button No.
Fig 1. Fig 2. Fig 3.
MIX MIC 1
