SONY STRNX300
Manual de Servicio

(Page 5)

Step 3: Setting the time
You must set the time before using the timer functions.

1

Press CLOCK/TIMER.
The hour indication flashes.

2 3

Press V or v repeatedly to set the hour. Press ENTER.
The minute indication flashes.

1
V

4 5

Press V or v repeatedly to set the minute. Press ENTER.
The clock starts working.

3,5
b

2,4

B v

Tips
� If you make a mistake, start over from step 1. � Setting the time deactivates the demo mode. If you want to display the demo mode, press DEMO (STANDBY) when the power is off.

To change the time
The previous explanation shows how to set the time while the power is off. To change the time while the power is on, do the following: 1 Press CLOCK/TIMER. 2 Press V or v repeatedly to select the SET CLOCK. 3 Press ENTER. 4 Perform steps 2 through 5 above. Note
The clock settings are cancelled when you disconnect the mains lead or if a power failure occurs.

10

4