|
|
|
Usuarios conectados
Actualmente hay 5794 visitantes online. |
|
Productos
|
|
Información
|
|
Destacado
|
|
|
 |
|
|
No hay comentarios de productos.
STR-DA2100ES SECTION 4 TEST MODE
TUNER FACTORY PRESET MODE
All preset contents are reset to the default setting. Procedure: 1. While pressing the [MULTI CH IN] and [DISPLAY] buttons, press the I/1 button to turn on the main power. 2. The message �FACTORY PRESET� appears and the present contents are reset to the default values.
SOUND FIELD INITIALIZE MODE
The preset sound field is cleared when this mode is activated. Use this mode before returning the product to clients upon completion of repair. Procedure: 1. While pressing the [2CH] button, press the I/1 button to turn on the main power. 2. The message �S. F. INITIALIZE� appears and initialization is performed.
MEMORY CLEARING MODE
All preset contents are cleared when this mode is activated. Use this mode before returning the product to clients upon completion of repair. Procedure: 1. While pressing the [MUSIC] and [SPEAKERS] buttons, press the I/1 button to turn on the main power. 2. The message �MEMORY CLEARING� appears and the memories are reset to the default values. 3. When done, the message �MEMORY CLEARED� appears.
COMMAND MODE CHANGE MODE
The command mode of the remote-commander which this set receives can be changed. Procedure: 1. While pressing the [INPUT MODE] button, press the I/1 button to turn on the main power. 2. Either the message �C.MODE.AV1� or �C.MODE.AV2� appears. Select the desired mode.
VERSION MODE
When this mode is used, the model, the destination and the software version number are displayed. Procedure: 1. While pressing the [DISPLAY] and [TUNING --] buttons, press the I/1 button to turn on the main power. 2. The model, the destination and the software version number appears.
SF LOCK ON/OFF CHANGE MODE
Procedure: 1. While pressing the [MUSIC] and [MEMORY/ENTER] buttons, press the I/1 button to turn on the main power. 2. Either the message �SF LOCK [OFF]� or �SF LOCK [ON]� appears.
SWAP MODE
Procedure: 1. While pressing the [MAIN MENU] and [PRESET TUNING --] buttons, press the I/1 button to turn on the main power. 2. The message �SWAP MODE � appears. 3. Press the [MEMORY/ENTER] button. 4. The message ��00dB� appears. (Volume level is �MIN�) 5. Press the [MEMORY/ENTER] button once again. 6. The message ��49dB� appears. (Volume level is �MID�) 7. Press the [MEMORY/ENTER] button once again. 8. The message �+13dB� appears. (Volume level is �MAX�) 9. Press the [MEMORY/ENTER] button once again. 10. The message �MUTING� appears. 11. Press the [MEMORY/ENTER] button once again. 12. The message �MUTING OFF� appears.
FLUORESCENT INDICATOR TUBE PATTERN CHECK MODE
All fluorescent segments are tested. When this test is activated, all segments turn on at the same time, then each segment turns on one after another. Procedure: 1. While pressing the [SPEAKER] and [TUNING --] buttons, press the I/1 button to turn on the main power. 2. All segments and [MULTI CHANNEL DECODING] indicator LED turn on.
TUNER AM STEP CHANGE (9 kHz/10 kHz) MODE
Either the 9 kHz step or 10 kHz step can be selected for the AM channel step. Procedure: 1. Press the I/1 button to turn on the main power. 2. Turn the [INPUT SELECTOR] dial to select the �AM� 3. Press the I/1 button to turn off the main power. 4. While pressing the [PRESET TUNING +] or [TUNING +] button, press the I/1 button to turn on the main power. 5. Either the message �9 K STEP� or �10 K STEP� appears. Select the desired step.
10
|
|
|
> |
|
