Note Do not allow more than 20 seconds to elapse between each step of the procedure. Tips � If you have entered a wrong number in step 3 and have not pressed (VOL/PGM) (step 4) yet, just turn Jog Dial down to erase it. Then enter the correct number. � You may press Jog Dial instead of (VOL/PGM) in step 4.
To store a number to be dialed via Private Branch Exchange (PBX)
Before entering a phone number in step 3 on page 21, do as follows:
1 2
Enter the outside line access digit (e.g., 9). Press (PAUSE).
To change a stored number 1 Press (VOL/PGM).
2 3 4 5
Press one of the ONE-TOUCH DIAL buttons ((A) to (C)). The current number appears on the display. Turn Jog Dial down to erase the current number. Enter a new number. Press (VOL/PGM).
Note You can replace the stored number with a new number, but you cannot just erase it.
Making calls with one-touch dialing
1 2
Press (TALK) and wait until �TALK� appears on the display. Press one of the ONE-TOUCH DIAL buttons ((A) to (C)). The phone number stored on the one-touch dialing button will appear on the display and will be dialed.
To check the phone number before one-touch dialing
While the handset is not in use, press one of the ONE-TOUCH DIAL buttons ((A) to (C)). The number stored on the button appears on the display for five seconds. To dial the number, press (TALK) while the number is displayed.