SONY SPP936
Manual de Servicio

http://cxema.ru
sRGB modes (IMAGE RESTORATION) Additional settings (OPTION) You can make additional adjustments to the color in greater detail
You can lock controls, the on-screen language, change menu position, and set the COLOR mode. Press the MENU button. 1 The menu appears on the screen. COLOR and press the control button.

EASY x EXPERT mode Restoring color from the EASY, PRESET, or

1 Press MENU button. by selecting the EXPERT mode. The colors of most display monitors tend to gradually change

The menu appears on the screen. brilliance over several years of service. The IMAGE

2 Move control button up or down to highlight The menu appears on the screen. sRGB menus allows you restore color to the original factory

1 Press the MENU button. RESTORATION feature found in the EASY, PRESET, and

COLOR and press the control button. quality levels. The explanation below explains how to restore the The COLOR menu appears on screen. Move the control button up or down to highlight monitor�s color from the EASY mode for example. 2

First, Move control button up or down to highlight . The COLOR menu appears on the screen. select EASY, PRESET, or sRGB mode in the OPTION
COLOR : EXPERT The adjustment bar appears. R R desired adjustment item. G B 45 Adjust selected item according to the following E X I T : MENU COLOR and press the control button. 5 0 K

2 Move the control button up or down to highlight 3

Then press the control button. menu (page 15).

OPTION and press the control button. The OPTION menu appears on the screen.

1 3
The menu appears on the screen.

COLOR : EASY G Press the MENU button. Move control button up or down to select the B

2 Move the control button up or down to highlight instructions.
The COLOR menu appears on the screen. x Locking the controls (CONTROL LOCK) R (red), G (green), and B (blue) component of input You can protect adjustment data by locking the 3 controls. 4 Move control button up or down to fine tune the signal for each of GAIN 6 ) and BIAS ( ). Then

E X I T : MENU Move control button up or down to adjust the

3

Move the control button up or down to highlight

IMAGE RESTORATION. Then press the control

button. color temperature. press the control button. highlight (CONTROL LOCK) and press the control The new color temperature setting fine tuned between If you want to reset the EXPERT adjustments, select button. Then move the control button up or down to 5000K to 11000K is stored memory. select ON and press the control button. 0 (RESET) COLOR menu. Then OK in RESET Move the control button up or down to select OK. 4 Only the ! (power) MENU button, INPUT switch, and window.
COLOR If any other items are selected, mark appears on the

Then press the control button.

The sRGB setting is an industry standard color space

US
2 CANCEL
OK sRGB compliant computer products. To adjust colors to the Repeat the procedure above and set (CONTROL LOCK) to OFF.

x sRGB mode

(CONTROL LOCK) of the OPTION menu will operate. x PRESET mode screen. 1 Press the MENU button.

1-7
x Changing the on-screen language
Then press the control button.
� Before using this feature, the monitor must be in normal operation :

The menu appears on the screen. protocol designed to correlate the displayed and printed colors of RESTORAT I ON

I MAGE

To cancel the control lock

Move the control button up or down to highlight profile, simply select sRGB mode in the COLOR

MODE menu of the OPTION ( ) menu. COLOR and press the control button. E X I T : MENU The COLOR menu appears on the screen.

3 Move the control button up or down to highlight .

The adjustment bar appears. x Changing the menu�s position

However, in order to display the sRGB colors correctly ( γ = 2.2, (LANGUAGE) The picture disappears while the color is being restored (about 6500K), you must set the PICTURE EFFECT mode to 2 seconds). After color is restored, the picture reappears See page 8. PROFESSIONAL (page 11) and your computer to the sRGB on the screen again. profile. If select this mode, you cannot operate the CONTRAST/BRIGHT menu adjustments. Notes

(OSD POSITION)

: PRESET COLOR s RGB Change menu�s position if it is blocking an image on the

9 3 0 K

5 0 K : / monitor in normal operation mode for full 30 minutes. If the

mode (green power indicator on) for at least 30 minutes. If the monitor goes into power saving mode, you must return the monitor to normal screen. s RGB operation mode and wait 30 minutes for monitor be ready. Move the control button up or down to select (OSD You may need adjust your computer�s power saving settings to keep 6 5 0 K POSITION) for horizontal adjustment, or (OSD

POSITION) for vertical adjustment and press the down to shift the on-screen menu.
I MAGE

EX E X I T : MENU monitor is not ready, the following message will appear. button. Then move the control button up or

4 Move control button up or down to select the COLOR Note

desired temperature. Your computer and other connected products (such as a printer), must be x Setting the COLOR mode The preset color temperatures are 5000K, 6500K, and 9300K. sRGB compliant. RESTORAT I ON See page 15. Since default setting is 9300K, the whites will change AVA I LABLE from bluish to a reddish hue as the temperature is WARM UP lowered to 6500K and 5000K. E X I T : MENU
� The monitor may gradually lose its ability to perform this function due to natural aging of the picture tube.

AFTER

16 17