JVC SP-MXKA7
Manual de Usuario

Using the CD Player

Example of indication:
When CD tray has ejected once and then CD1 is pressed. (DISC1 is selected) Shows that the disc is rotating. Shows that this disc number is selected.

� When you use an 8 cm (3'') CD, place it on the inner circle of the tray. � You can load CDs while listening to the other source or while listening to the CD being played back. � When power is turned off with the tray opened, the tray is automatically closed. � If the CD cannot be read correctly (because it is scratched, for example), � 00. 00:00� appears on the display.

To Unload CDs
One Touch Play
The power comes on, and operations are done automatically. � By pressing the CD 6 button, the System will come on, and if a CD is loaded for the disc number that was lastly selected, it will start playing from the first track. � By pressing the CD1-CD3 button, the System will come on, and if a CD is already loaded for the selected disc number, it will start play from the first track. Take out the CD as shown below.

1

While the CD Player is stopped, press the CD Open/Close 0 button on the Unit to open the tray. Remove the CD, then press the DISC SKIP button on the Unit.
The tray turns for the next CD.

2 3 4

To Load CDs 1 2
Press the CD Open/Close Unit to open the tray. Place a CD, with its label side up, onto the tray.
Be sure that the CD is securely seated on the disc tray.
With the label side up

Repeat step 2 to remove all the CDs. Press the CD Open/Close Unit to close the tray.

0

button on the

0

button on the

� You can remove CDs while listening to the other source.

� You can also remove the CDs during playback. However, in this case, you can only remove the CDs that are not being played back.

CD-R / RW PLAYBACK

3 4 5

Press the DISC SKIP button on the Unit and place the next CD.
When you press the button, the tray turns for the next CD.

Repeat step 3 for the last CD. Press the CD Open/Close 0 button on the Unit.
The tray is closed.

� When placing a disc in the tray, be sure to position the disc inside the recess correctly. Otherwise, the message �NO DISC� will appear in the display, and the disc may be damaged or the unit may be damaged when the tray is opened, or it may be difficult to remove the disc from the unit.

12

English