SECTION 3 DISASSEMBLY
� Before disassembling the main body, lay down it first. 3.1 Removing the cabinet assembly (See Figs.1 and 2)
(1) From the bottom side of the main body, remove the four screws A attaching the stand assembly. (See Fig.1.) (CAUTION) � The speaker wire assembly is connected with the speaker terminals at this time. Be careful not to damage the speaker terminal and the speaker wire. (2) From the top side of the stand assembly, disconnect the speaker wire assembly on the speaker terminals. (See Fig.2.) (3) Remove the seven hooks a attaching the net assembly to the cabinet assembly. (See Fig.2.) (CAUTION) When removing the net assembly, be careful not to damage the speakers and the cabinet assembly. (Reference) � As the net assembly is fixed with the adhesive and the two-sided tape, remove the net assembly by using a minus driver or similar tool. � Attach the net assembly after applying the adhesive to the hooks a. (4) Remove the two screws B and screw C. (See Fig.2.) (5) Pull out the stand from the cabinet assembly while peeling off the adhesive section b. (See Fig.2.)
