ONKYO SKS-101
Manual de Usuario

SPEAKER SYSTEM

SKS-101

Center Speaker System (SKC-101) Surround Speaker System (SKR-101)

Instruction Manual
Connections

Thank you for your purchase of the Onkyo speaker system. Please read this manual thoroughly before using it. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new speaker system. Please retain this manual for future reference.

Before using this unit
The speaker cabinet is made of wood and sensitive to extreme temperatures and humidity. Avoid placing the speaker system in locations subjected to direct sunlight or in humid places such as near an air conditioner, bathroom, or kitchen. Be sure to turn off your amplifier before connecting the speaker system. Connecting it while the amplifier is on may result in damage to the amplifier or the speaker system.

Model name and dimentions
SKC-101 Center Speaker
435 mm 115 mm

Turn the sound volume to the minimum and disconnect the power cord to the amplifier before connecting the speaker cables. The nominal impedance of this speaker system is 6 . Use only amplifiers capable of handling this impedance. Use the supplied speaker cables to connect between the speaker�s input terminals and the amplifier�s speaker terminals as illustrated below. Be sure to connect the Right and Left surround speakers with the amplifier�s corresponding speaker terminals. Also, be sure that you are connecting the speaker�s positive (+) and negative (�) input terminals with the amplifier�s corresponding positive and negative speaker terminals. Otherwise, undesirable sound field or impaired bass-range reproduction will result. Before turning on the amplifier�s power switch, pull lightly on the speaker cables to ensure that they are connected securely.

SKC-101
125 mm

The speaker grille is not removable.

165 mm

SKR-101 Surround Speaker
125 mm

115 mm

217 mm

The speaker grille is not removable.

145 mm

�+

Precaution on use
This speaker system can handle the specified input power when it is used for ordinary music reproduction. If the following abnormal signals are fed to the speaker, however, an overcurrent may flow in the internal circuits, causing burning or breakage of the wires even if the input power is below the specified rating. 1. Noise produced when FM station is not tuned in 2. Sound produced when fast-forwarding cassette tape deck 3. High-frequency sound generated by an oscillator, an electronic musical instruments, etc. 4. Oscillating amplifier signals 5. Special test signals produced by audio checking CD, etc. 6. Sound produced when connecting or disconnecting audio connection cables (Always turn off the amplifier�s power before connecting or disconnecting cables.) 7. Howling when a microphone is used
SKR-101(R) SKR-101(L)

In general, Braun tubes used for color television sets are extremely sensitive and can be affected even by the magnetism of the earth. If a speaker system is used near them, therefore, discoloration or distortion of pictures will occur. To allow use with color television sets, etc., the SKC-101 Center Speaker system is provided with magnetic shielding. Even so, discoloration may still result, depending on the installation environment. If discoloration occurs, turn off the television set, wait 15 to 30 minutes, and then turn it on again. This activates the selfdemagnetizing function of the television set, improving display quality. If discoloration persists even after performing this remedy, move the speaker further from the television set. Discoloration may also be caused when a magnet or other magnetized object is near the television because of the combined effect.

+�
R
CENTER SPEAKER

L
SURROUND SPEAKERS

AV amplifier
�+

Use with a TV set