AEG SK71040-5I
Manual de Usuario

Fresh food refrigeration
To obtain the best performance: � do not store warm food or evaporating liquide in the refrigeator � do cover or wrap the food, particularly if it has a strong flavour. � Position food so that air can circuiate freely round it. Useful hints: Meat (all types): wrap in polythene bags and place on the glass shelf above the vegetable drawer(s)For safety, store in this way only one or two days at the most. Cooked foods, cold dishes, etc: these should be covered and may be placed on any shelf. Fruit and vegetables: these should be thoroughly cleaned and placed in the special drawer(s) provided. Butter and cheese: these should be placed in special airtight containers or wapped in aluminium foil or polythene bags to exclude as much air as possible. Milk bootles: these should have a cap and should be stored in the bottle rack on the door. Bananas, potatoes, onions and garlic, if not packed, must not be kept in the refrigerator.

Gerät in die Nische einschieben, bis die Anschlagleiste (1) oben am Möbel anliegt und die vordere Kante des Scharniers mit der Türöffnungsseite bündig an der Nischenseitenwand ansteht (2).

1

2
D023

Gerät mit den 4 beiliegenden Schrauben befestigen. (I)

I

Freezing and storing frozen food
You can use your freezer for freezing fresh food yourself.

Important!
� The temperature in the freezer compartment must be �18 °C or colder before freezing food. � Please observe the freezing capacity given on the rating plate. The freezing capacity is the maximum quantity of fresh food that can be frozen within a period of 24 hours. If you wish to freeze food several days in a row, please observe a maximum capacity of only 2/3 to 3/4 of that on the rating plate. The quality of the food is best preserved when it is frozen right through to the core as quickly as possible. � Allow warm food to cool down before freezing. The warmth will cause increased ice formation and increase the power consumption. � Please note the maximum storage times specified by the manufacturer.
36

In die Befestigungs- und Scharnierlöcher beiliegende Abdeckkappen (C-D) einsetzen. Belüftungsgitter (B) und Scharnierabdeckung (E) aufstecken.

D

C

E B
9