Installation
a) b) c) d) e) Caller ID unit Stand studs AC power adapter Long phone line cord Short phone line cord 1 pc. 2 pcs. 1 pc. 1 pc 1 pc
EN
INSTALLING BATTERIES Please install 4 x AAA batteries (alkaline batteries are recommended) to retain the Caller ID records and keep real time clock running in case there is a power failure. IMPORTANT : a) Use only fresh batteries of the required size and recommended type. b) Do not mix old and new batteries, different types of batteries (standard, alkaline or rechargeable) or rechargeable batteries of different capacities. c) When replacing the batteries, if you do not install the new batteries within 30 seconds after removing the old ones, you may lose all information stored in your unit. d) If you do not plan to use your unit with batteries for a month or longer, remove the batteries. Batteries can leak chemicals that can destroy electronic parts. e) Dispose of old batteries promptly and properly. Do not burn or bury them. When the Low Battery icon ( ) appears, replace the batteries. 1. Disconnect the telephone line. 2. Open the battery cover by inserting a sharp object (such as a clip or a pencil) into the two slots at the top of the battery compartment cover on the bottom of your Caller ID unit. 3. Place the new batteries in the compartment following the polarity symbols (+ and -) marked inside. 4. Replace the battery cover. 5. Reconnect the telephone line. IMPORTANT : When replacing the batteries, if you do not install the new batteries within 30 seconds after removing the old ones, you may lose all 5