WHIRLPOOL SF395LEEB0
Manual de Usuario

USING THE SELF-CLEANING CYCLE

SETTING THE CONTROLS (CONT.)
To delay the start using delay start time:
1. Press the auto clean pad.
This will automatically set a 31�2-hour Self-Cleaning cycle. NOTE: There will be a 30-minute cool-down 1�2 hour before the cycle is over.

PRESS
AUTO CLEAN

YOU SEE

CLEAN TIME

2. Set the cleaning time (optional).
If you want a Self-Cleaning cycle longer or shorter than 31�2 hours, use the Hour and Minute pads to set the cleaning time you want. Press the �up� (s) or �down� (t) pad(s) until a time between 21�2-41�2 hours shows on the display. � Use 21�2 hours for light soil. � Use 31�2-41�2 hours for average to heavy soil.

PRESS
HR MIN

YOU SEE

CLEAN TIME

(example for 41�2-hour cycle)

3. Press the delay start time pad.

PRESS
DELAY START TIME

YOU SEE

START

CLEAN TIME

4. Set the start time.
Press the �up� (s) or �down� (t) pad(s) until the correct time shows on the display. The oven will automatically come up with the stop time by adding the set cleaning time to the set start time.

PRESS
HR MIN

YOU SEE

START

CLEAN TIME

(example for 2:30 start time)

5. Press the start/enter pad.

PRESS
START
ENTER

YOU SEE

DELAY

ON

CLEAN

5 SEC

6. After the Self-Cleaning cycle starts:
The door will lock as soon as you press the start/ enter pad.

YOU SEE

HEAT TIMED

ON

LOCKED CLEAN TIME

7. After the Self-Cleaning cycle ends:
LOCKED goes off and the door unlocks. NOTE: The stop time will be the start time plus the cleaning time.

YOU SEE

CLEAN

continued on next page

29