To delay the start using Delay Start Time: Push the Clean pad. Push the Delay Start
Time pad. START, TIME, CLEAN and �cln� will light up. mm Use the Hour and Minute pads to set the desired start time. Push the �up� (A) or �down� (V) pad(s) until the correct time shows on the display. B A L-
Push the Start/Enter pad. DELAY, CLEAN
and the time of day will light up on the display to indicate that the oven is programmed to start the Self-Cleaning cycle at a later time. After the start time has been set, the large display will go back to showing the current time of day. DELAY and CLEAN will stay on. When the start time is reached, DELAY will go off, TIMED, HEAT, CLEAN and CLEAN TIME will light up and the oven will start to clean.
4. After the Self-Cleaning cycle is started,
LOCKED lights up on the display when the oven temperature goes above normal bakinglroasting temperatures. The Lock Lever must not be moved and the door cannot be opened when LOCKED is on.
5. After the Self-Cleaning cycle is completed, the time of day will show on the
display.
