SHARP SF1118
Manual de Servicio

B. Mirror base wire removal 1 Remove the upper cabinet L, and the left cabinet.

3 Rotate the mirror base B counterclockwise to remove. 4 Disconnect the connector from the copy lamp unit on the rear
frame side and from the No. 2/3 mirror unit.

5 Rotate the No. 2/3 mirror unit counterclockwise and remove.

3

1
2 Remove the mirror wire spring from the groove on the left side of
the optical base plate.

2

D. No. 2/3 mirror unit (mirror base B) assembly
Reverse the above procedures.

E. Mirror base wire stretching
Check that the wire groove in the front winding pulley is aligned with the wire groove in the rear winding pulley. (If there is too much a shift in the circumference, loosen two pulley fixing screws, and visually fit the positions and fix.

3 Remove the mirror base wire from the winding pulley.
(Remove he wire fixing screw.)

C. No. 2/3 mirror unit (mirror base B) removal 1 Move the mirror base B to the center between the positioning and
the optical base plate left surface.

2 Lift the front side of mirror base B and separate it from the rail.
(The front side only)

6�8