TOSHIBA SDV57HTSU
Manual de Usuario

TV Connections
Make one of the following connections, depending on the capabilities of your TV.

Speaker System Connections
Connect the speakers using the supplied speaker cords by matching the colors of the terminals and those of the cords. To obtain the best possible surround sound, adjust the speaker parameters (distance, level, etc.). otes Be sure to match the speaker cord to the appropriate terminal on the components: 3 to 3 and # to #. If the cords are reversed, the sound will be distorted and lack bass. If you use front speakers with low maximum input rating, adjust the volume carefully to avoid excessive volume output to the speakers. Do not disassemble the front covers of supplied speakers.

Video connection
Connect the DVD/VCR VIDEO OUT jack on the DVD/VCR Receiver to the Video in jack on the TV using the supplied video cable (V).

Front Speaker (Right)

Front Speaker Center Speaker (Left)

S-Video connection
Connect the S-VIDEO OUT jack on the DVD/VCR Receiver to the S-Video in jack on the TV using the S-Video cable (S).

Component Video (ColorStream®) connection
Connect the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks on the DVD/VCR Receiver to the corresponding in jacks on the TV using Y Pb Pr cables (C).

Radio Antenna Connections
Rear speaker (Right surround) Rear speaker (Left surround)

Connect the supplied AM/FM antennas for radio listening.
AM loop antenna (supplied)

the AM loop 1 Connect connectors. antenna to the AM antenna

Subwoofer

Progressive Scan (ColorStream Pro®) connection
If your television is a high-definition or �digital ready� television, you may take advantage of the DVD/VCR Receiver�s progressive scan output for the highest video resolution possible. If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try Progressive Scan on the DVD/VCR Receiver. Antenna

2 Connect connectors. antenna to the FM the FM wire antenna
otes To prevent noise pickup, keep the AM loop antenna away from the DVD/VCR Receiver and other components. Be sure to fully extend the FM wire antenna. After connecting the FM wire antenna, keep it as horizontal and flat as possible.

Connect the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks on the DVD/VCR Receiver to the corresponding in jacks on the TV using Y Pb Pr cable (C).

To Wall Outlet
Before you connect this system to your TV, be sure to turn off the power and unplug both units from the wall power outlet before making any connections.

A

V

C

R

S

AUDIO INPUT

VIDEO INPUT

COMPONENT/PROGRESSIVE SCAN VIDEO INPUT

ANTENNA INPUT

S-VIDEO INPUT

L

R

L

Pr

Pb

Y

Rear of TV