PIONEER S-DV270T/XCN5
Manual de Servicio

1

2

3

4

1. REASSEMBLY AND DISASSEMBLY PRECAUTIONS
1.1 FRONT SPEAKER
A

GRILLE
The grille is attached to the cabinet by its bosses applied with adhesive. To detach it, pry it open by inserting a f lat blade screwdriver into lower right and lower left slot. To attach it, apply adhesive to the holes on the baf�e. Then press it to the baf�e. CAUTION There are 10 bosses for press-�tting at the grille. To detach the grille, remove in order from lower bosses. (Refer to the figure in page 4.) In order not to damage the bosses, don't remove it forcibly. Pry it open little by little. Be sure to insert a �at blade screwdriver from just beside of its bosses.

SPEAKER STAND BASES
The speaker stand base is attached to the bottom of cabinet by 3 external screws. To detach it, unfasten those screws. Attach the speaker stand bases to the stems using the screws provided. Once you have aligned the stem and base, secure with the small screws at the points shown below. Note that the speaker should face in the direction of the base of the isosceles triangle (outlined below).

1.2 CENTER SPEAKER
GRILLE
The grille is attached to the cabinet by 8 external screws. To detach it, unfasten those screws.

B

WOOFER
The woofer is attached to the baffle by 4 external screws. To detach it, unfasten those screws. To detach it, first remove the grille. Then remove the screws. When attaching it, face its terminal downward.

SPEAKER UNIT
The speaker unit, together with the grille, is attached to the cabinet by 4 external screws. To detach it, first unfasten those screws. Next remove the cabinet. Then remove the cable. When re-attaching it, face its terminal toward the leftward.

TWEETER
C

The tweeter is attached to the baffle by 3 external screws. To detach it, unfasten those screws. To detach it, first remove the grille. Then remove the screws. When attaching it, face its terminal leftward and rightward.

1.3 SURROUND SPEAKER
GRILLE
The grille is attached to the cabinet by 4 external screws. To detach it, unfasten those screws.

COSMETIC PANEL
The cosmetic panel is attached to the baf�e by its bosses applied with adhesive. To detach it, pry it open by inserting a �at blade screwdriver into lower slot. To detach it, �rst remove the speaker stand base and grille. Then remove the cosmetic panel. When attaching it, �t the boss into the hole on the baf�e.
D

SPEAKER UNIT
The speaker unit, together with the grille, is attached to the cabinet by 4 external screws. To detach it, first unfasten those screws. Next remove the cabinet. Then remove the cable. When re-attaching it, face its terminal downward.

Front

E

Rear

Stem (the bottom of cabinet)

Speaker Stand Base

F

2
1 2

S-DV270T
3 4