|
|
|
Usuarios conectados
Actualmente hay 5962 visitantes online. |
|
Productos
|
|
Información
|
|
Destacado
|
|
|
 |
|
|
No hay comentarios de productos.
1. Troubleshooting
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. No power when turned on. The initial screen is not displayed on the LCD. The DVD drive does not work. The operation of the DVD player stops at initializing display. Image output stops during the operation. No sound or abnormal sound comes out from the speakers in the DVD player. No image or sound comes out from the external output. No sound comes out from the headphones. No image or sound is output by external input. The DVD drive does not operate with the battery.
1.1 No power when turned on. When the power is turned on, and if the LED on the front panel does not light green, check the following items and repair the defective parts. (1) Check the power supply cable If the cable is not the supplied one, replace it with the supplied cable and turn on the power again. If the power supply cable is good, the AC adapter may be defective. If the LED does not light after replacing, check the following items. (2) Check the AC adapter If the AC adapter is not the supplied one, replace it with the supplied AC adapter and turn on the power. If the AC adapter is good, the power supply boards may be defective. If the LED does not light after replacing, check the following items. (3) Check the Power and Play buttons Press the POWER button or the PLAY button on the DVD player. If the power does not turn on, check the followings: * Check the connector of the switch unit in the DVD player. (If the connection is loose, repair the connection.) * Replace the switch unit and turn on the power again. If the LED does not light after replacing, check the following item. (4) Check the power supply harness (MH32) Check the connection of the 20-pin harness between the power IF board (A5A000246010) and the power board (A5A000247010). If the connection is loose, repair the connection. Then turn on the power again. If the LED does not light after the repair, check the following items. (5) Check the power supply IF board Check the soldered connection for the AC adapter. If a bad or poor solder connection is found, replace the power supply IF board or PJ1. If the LED does not light after replacing, check the following item. (6) Check the power supply board Replace the power supply board with new one and turn on the power again. If the LED does not light after replacing, check the following item. (7) Replace the main board
|
|
|
> |
|
